Xerox 700 ошибка 042 326 xerox

1. How do you get rid of error code 42-326 on the xerox 700 digital color press?

2. I believe that is the transfer belt silver patch is not being detected by the edge sensor, the patch and all rollers will need to be cleaned and the patch inspected for any damage or missing patch, then will need to do belt edge training to resolve the problem.

3. Ok, so you get that error fix — but you have rebooted the machine too many times. Now it is locked in the copy only mode. What is the code to reset the block?

4. Try this:
   From your message you sound like someone who is trained in servicing this machine and you probably well know that using this procedure is at your own risk:
   Hold down 0 (zero) for 5 seconds and press start (green) button
   Enter 6789, confirm
   Press log in/log out button or the key button
   Press systems settings, common settings, maintenance, NVM read/ write
   Enter nvm 741-105 and change it to 0 (zero)
   I have also seen advice to, after cleaning or replacing the transfer belt, to check the belt hole sensor for paper dust or other contamination.

5. 
   

   sefel
   New Member

   Joined:

   Jan 2017

   Messages:

   2

   Location:

   Ghana

   xerox 700 code 042-326

   how do I enter the diagnotic mode on xerox 700 press

6. 
   

   sefel
   New Member

   Joined:

   Jan 2017

   Messages:

   2

   Location:

   Ghana

   I have cleaned the IT belt but code is still there and therefore want to clear it and I don’t know how to enter the diagnostic mode

7. press 0 wait 5 second and click start button (green). now type 6789 and confirm.

9. Wondering if anyone is still monitoring this thread. I am having this same issue and I have replaced the belt, replaced the sensor and attempted to reset the NVM code but the error continues. Anybody have any other ideas or thoughts on this?

Dislikes:  0

1. 07-21-2013

   
   

   #1

   

   
   Technician
   

   

   ---

   Rep Power

   20

   Xerox 252, fault code 042-326 or 042-327
   

   we just cleared a Bad Paper jam on our xerox 252, restarted the machine and now its giving us fault 042-326. Tried to move and center IBT Belt, then got fault code 042-327. Are these 2 faults related? How can they be cleared? Iam missing something?
   Your Help is very much appreciated.

   ---

2. 07-21-2013

   
   

   #2

   Re: Xerox 252, fault code 042-326 or 042-327
   

   Did you check IBT silver patch? Is it dirty?

   ---

3. 07-21-2013

   
   

   #3

   

   
   Technician
   

   

   ---

   Rep Power

   20

   Re: Xerox 252, fault code 042-326 or 042-327
   

   Originally Posted by bojans
   

   Did you check IBT silver patch? Is it dirty?

   I cleaned the silver patch inside the belt. Now it’s mainly fault 042-327Is there a way to set the belt in zero position?

   ---

4. 07-21-2013

   
   

   #4

   Re: Xerox 252, fault code 042-326 or 042-327
   

   First you need to remove the IBT assembly and make sure the belt is installed so that the IBT belt edge and the IBT belt frame are approx the same distance from the front and rear.

   Next you need to run the Belt Edge Learn adjustment.

   Enter diagnostics mode:
   Press and hold the 0 key for 5 seconds.
   While still holding the 0 key, press the start key.
   The CE Access Number screen will appear.
   Enter 6789 and confirm.
   The topmost area of the UI display will change to a white banner with black lettering to let the user know that the mode has changed to the CE mode.

   Press the log in/out button.
   select system settings
   select common settings
   select maintenance / diagnostics
   select sub system
   select belt edge learn
   select start

   Hope that fixes it for you. If not there are a bunch of additional steps to troubleshoot this error.

   ---

5. 07-22-2013

   
   

   #5

   

   
   Trusted Tech
   

   50+ Posts

   

   ---

   Rep Power

   21

   Re: Xerox 252, fault code 042-326 or 042-327
   

   have you check the 741-105 make sure is 0 thanks

   ---

6. 07-22-2013

   
   

   #6

   

   
   Technician
   

   

   ---

   Rep Power

   20

   Re: Xerox 252, fault code 042-326 or 042-327
   

   Originally Posted by max2013
   

   have you check the 741-105 make sure is 0 thanks

   Followed all instructions, removed belt, put it back on. Machine starts with no fault, but when I enter belt edge learn menu and start the operation the machine faults back again to 042-327. Could it be the belt itself that needs to be changed. It does not any damage. Please HELP!!!!

   ---

7. 07-22-2013

   
   

   #7

   Re: Xerox 252, fault code 042-326 or 042-327
   

   It’s time for service manual to read and follow proper procedures !

   ---

8. 07-23-2013

   
   

   #8

   

   
   Trusted Tech
   

   50+ Posts

   

   ---

   Rep Power

   25

   Re: Xerox 252, fault code 042-326 or 042-327
   

   Originally Posted by mpsolutions
   

   Followed all instructions, removed belt, put it back on. Machine starts with no fault, but when I enter belt edge learn menu and start the operation the machine faults back again to 042-327. Could it be the belt itself that needs to be changed. It does not any damage. Please HELP!!!!

   You can get a silver patch and place before the current silver patch. However, saying that I have replaced 2 pretty good belts due to the weather conditions. On days that are too cold I have noticed the edges of the belt curl upwards and the silver patch is sometimes not detected. When the room is an appropriate temperature the edges seem to go back into the appropriate shape.

   ---

9. 07-25-2013

   
   

   #9

   

   
   Senior Tech
   

   100+ Posts

   

   ---

   Rep Power

   0

   

   Re: Xerox 252, fault code 042-326 or 042-327
   

   Try to cut new silver patch from oracal film, and replace old patch with new one. I did that many times.
   Hope it helps.
   I attached picture.

   ---

10. 07-30-2013

    
    

    #10

    Re: Xerox 252, fault code 042-326 or 042-327
    

    Make sure the optical sensor that reads the reflective patch is clean. Tends to get dusty.

    ---

Tags for this Thread